2Pcs Laboratory Drying Rack, Detachable 27 Pegs Glassware Drying Rack Wall Mount Desk Top Lab Supply Cleaning Equipment for Tube Beaker Flask Dry

How to Install1. Attach the upper mounting clip to the wall with expansion screws.2. Hang the mainboard on the mounting bracket and fix it with plastic fixing screws. (Note: please do not insert the plastic fixing screw insert first, insert the insert to fix it at the end when the installation is finished)3. Install the middle and lower mounting clip. After finding a good position, first use expansion screws to fix it on the wall, and then use plastic fixing screws to fix it with the main board.4. Install the bottom bracket. Find a good position and then put the expansion screws on the wall, then use the plastic fixing screws to fix it with the main board, and finally use the screws to fix it on the expansion screws (Note: Please choose one of the installation methods in steps 3 and 4. It cannot be installed at the same time. Before installation, please install the drip rods and drainage pipe.)How to Install Double-sided Draining Rack1. Put the two racks back to back after installing the drip pegs. Then install the upper, middle, and lower three fixing seats with plastic fixing screws.2. Drainage pipe installation: cut one of the pipes, and connect the pipe to one end of the one-pass drainage connector and three-pass drainage connector respectively, and the other one connects to the end of the three-pass connector. Drain the water into the pool.SpecificationsStyle: ModernShape: RectangularColor: GreyMaterial: PPSurface Treatment: Injection MoldingMount Type: Wall Mount, Self-standing, DesktopAssembly Required: YesIndoor/Outdoor Usage: ‎IndoorNumber of Pegs: 27Number of Items: 2Drainpipe Length: 60 cm/ 23.62 inEach Peg Length: 13.8 cm/ 5.43 inEach Peg Bottom Diameter: 1.1 cm/ 0.43 inEach Peg Top Diameter: 0.73 cm/ 0.29 inGross Weight: 4.11kg/ 9.06 lbsProduct Size (LxW): 55x40cm/ 21.65x15.75 inPackage Size: 57x16x43cm/ 22.44x6.3x16.93 inPackage Included2x Lab Drying Draining RacksOther Accessories

• ➤【Premium Material】This laboratory drying rack is made of high-quality PP material, it's sturdy and durable, and has good corrosion resistance. And It surface has been carefully processed to make it smooth without burrs and will not scratch the beaker.
• ➤【Large Capacity】Equipped with 6 rows of 27 dry pegs, with a length of 5in/125mm, and a diameter of 0.35in/9mm, it can air dry cups of various depths. And there is a tray hole and a water outlet hose at the bottom for better drainage and leakage prevention.
• ➤【Removable Design】The dry rack adopts a relatively staggered design to ensure sufficient air drying space. You can also disassemble and adjust the spacing of each bracket according to the size of the utensils that need to be aired.
• ➤【Convenient to Use】Adopting a wall mounted design, it can be installed on the wall with simple operation, saving space and keeping utensils away from the work area to avoid accidental collision and breakage.
• ➤【Wide Application】This laboratory glassware rack is designed specifically for drying test tubes, beakers, flasks, glassware, and other laboratory supplies, and is very suitable for industries such as laboratories, medical, chemical, quality inspection, schools, and research institutes.